Brushed Brass Side Lever Basin Mixer Tap - Deck Mounted

There’s a certain elegance in placing the control where you least expect it. This single lever basin mixer keeps its single lever tucked to the side of the rounded body, allowing the sweeping swivel spout to remain the defining feature from the front. Made from brass with a brushed finish and PVD coating, it pairs a soft metallic appearance with a design to withstand everyday bathroom conditions. The tap stands 200mm high, with a slender 30mm-wide body and a 140mm projection that gives the spout plenty of reach.

The side lever is designed to make control feel intuitive once you get used to its movement. In its upright position, it supplies cold water; move the lever down  to increase the temperature towards hot. To start the flow, tilt the lever away from the tap body, with the same control allowing you to adjust the amount of water released. This gives the deck mounted mixer a particularly tidy arrangement, keeping temperature and flow adjustment together without adding another handle or control.

There is plenty going on beneath the simple exterior too. Ceramic disc cartridge provides smooth lever movement and helps minimise drips, while the aerator shapes the water into a steady, aerated stream. The 1 hole tap requires just 0.5 bar minimum water pressure and uses G 1/2" thread connections, making the technical side of installation just as considered as its appearance. The PVD coating also helps the brushed surface withstand corrosion and the demands of regular bathroom use.

Give this brushed brass basin mixer tap room to be noticed by setting it against a softly coloured basin where its curved profile can provide a pleasing counterpoint to sharper surroundings. You could also pair the swivel spout with a wider basin to make the most of its movement. Backed by a 15-year manufacturer guarantee, including 5 years on the cartridge.

Features & Benefits:

• Made from brass with a brushed finish and durable PVD coating
• Single-hole, deck-mounted design for a neat installation
• Side-mounted single lever provides separate hot and cold water control
• Lever moves down through 90° to increase water temperature from cold towards hot
• Lever tilts away from the tap body to control water flow
• Swivel spout allows you to direct the water where needed
• Tap height: 200mm
• Spout projection: 140mm
• Tap body width: 30mm
• Built-in aerator 
• Ceramic disc cartridge supports smooth operation and helps minimise drips
• Suitable for a minimum water pressure of 0.5 bar
• G 1/2" thread connections for installation
• Backed by a 15-year manufacturer guarantee, with 5 years on the cartridge

Flow Rate:

• 0.5Bar: 2.6L/min 
• 1Bar: 3.6L/min 
• 2Bar: 5.2L/min 
• 3Bar: 6.4L/min